When was the last time you checked and paid attention to your garage door opener? Does it need to be fixed? Has it been more than five years since the last time you had it serviced? For most people, the garage door opener is among the most important home appliances. If you have one, it must work perfectly for your life to function properly.
Garage doors are used daily. Thus, the openers are prone to breaking down, and problems can occur anytime. When they do, it is critical to have the right solution to fix the problem. Unfortunately, most people need to learn what they are doing. As a result, many inexperienced garage door repair DIYers do more harm than good.
Are you going down the DIY path and want to try your hand at garage door repair and maintenance? Then this article will explain the most common garage door opener problems and a few simple solutions to help you.
Typical Garage Door Opener Issues and How to Correct Them
The Opener Switch Is Not Working
There are many causes why your garage door might not open when you hit the switch. Sometimes the door is simply locked. So, check for a lock button and disable it before opening the door again.
The motor may be unplugged, which is a likely possibility. To check, look at the motor attached near the light fixture on the ceiling. You should resolve the issue by plugging it back in.
More complex cases could involve photo-eye sensor damage or a tripped circuit breaker. These are two common problems that can interfere with the door switch. Make sure the photo-eye sensor is not clouded or covered by anything. Likewise, check for any burned-out fuse. One sign of this is you cannot turn on the lights in the garage. Try resetting the circuit breaker to see whether this fixes the problem.
Neither the Garage Door Opens or Closes
Does your overhead garage door refuse to open or close? There could be multiple reasons your garage door is not responding to any signals. To start troubleshooting, check the batteries in your remote and keypad. Next, look at the opener unit to see if all the lights are on and working. The motor is also possibly disconnected from power, or a fuse has blown.
Try addressing each of these potential problems one by one to start narrowing down the root cause of the issue. But, if none of these solutions work, it is best to consult a professional at Titan Garage Doors Quad Cities for help with on-the-spot diagnoses and repairs.
The Garage Door Opener Keypad Is Unresponsive
Some garage doors have keypads to open them. If you have one that does not work suddenly, check to see if the batteries are dead before continuing. Replace dead batteries. Then, try to enter your keypad number again to see whether that resolves the issue.
Sometimes your keypad may need reprogramming. For example, if you have a Liftmaster garage door opener model, you can check your manual for instructions or look for it online for your keypad model.
If these solutions do not pan out, it may not be the keypad itself that is broken but rather the antenna. The motor’s antenna picks up the signal from the keypad. Therefore, make sure it is pointed directly downward. If you still need help getting the keypad to function, you can contact the best team for garage door repair Quad Cities to assist you in identifying the issue.
Garage Door Repair Near Me
Do you have a garage door opener that is not working properly? Whether you use it for convenience or to increase your home’s security, having an issue with your garage door can be extremely frustrating. Titan Garage Door Quad Cities is your one-stop shop for garage door opener installation, including the most trusted brands, such as LiftMaster and Genie.
If you need a garage door opener repair, our experts are available 24/7 to help you with this certain garage door issue. Plus, we can provide you with the most cost-effective solutions with no hidden charges. So call Titan Garage Doors Quad Cities today for help, and we are more than happy to give you free estimates.
