15 YEARS OF SERVICE
Garage Door Spring Installation 15th Street B, Moline, IL
A broken torsion spring left a garage door heavy and hard to raise. Our Titan Quad Cities team completed garage door spring installation with a matched pair to restore balanced movement and safe access.
The garage door rose a few inches, then stopped. At a home on 15th Street B, the homeowner tried lifting it by hand and felt the added weight. One torsion spring had broken, leaving the door hard to lift and the opener under strain. Rather than keep pressing the remote, the homeowner called Titan Garage Doors Quad Cities for garage door spring installation in Moline, IL. We checked the lifting system and replaced both springs to bring the door back into balance.
Garage Door Spring Installation After a Torsion Spring Broke
See how replacing both torsion springs helped a residential garage door lift more evenly and move with control.
Why One Broken Spring Made the Whole Door Heavy
This white sectional door uses two torsion springs on a steel shaft above the opening. As the door moves, those springs help carry its weight. When one breaks, the other cannot provide the same lift on its own. The door may rise unevenly, stop partway, or demand more work from the opener.
The goal was to restore lift, not force the motor to work harder.
Finding the Right Springs for This Door
We secured the door and checked the spring system before removing parts. The center anchor, torsion shaft, and spring cones all play a role in how the springs hold and release tension. We also checked the lift cables and drums, which help keep both sides moving together.
Our team focused on:
- Door weight and spring size
- Shaft and center support
- Cable seating and even lift
We chose a pair suited to the door’s weight.
Why We Replaced Both Springs
Both springs support the door through daily use. When one breaks, the other may show similar wear and need repair soon. A matched pair also makes it easier to give the door even lifting support.
We removed the old springs, installed the new pair along the shaft, secured the cones, and set the tension with proper tools. To replace broken garage door spring hardware, we considered the full lifting system, not just one coil.
Checking Balance Before Handing Back the Remote
Next, we moved the door by hand to see whether it rose smoothly and held its position. We checked the lift cables as the door traveled, then checked the chain-drive opener, trolley, and release cord.
A plan to fix broken garage door spring problems is not complete until the door moves with control. Proper balance lets the springs support the weight while the opener guides the door.
Results: The Door Was Ready for Daily Use
With both new springs in place, the door lifted evenly and closed with control. The repair restored safe, secure access and reduced the load on the opener. Now, the homeowner could use the garage again with confidence.
Don’t Keep Testing a Door That Won’t Lift
Is your garage door stopping halfway up? Do you hear the opener working while the door barely moves? Repeated tries can put more strain on parts that already need care. Titan Garage Doors Quad Cities helps homeowners in Moline, IL find the cause and choose the right spring repair. We’ll explain what needs attention, what the repair involves, and how to get your garage back into daily use. We’re local and licensed, and we offer free estimates, warranty-backed work, and emergency service for urgent door problems.
Read our Google reviews and ratings for local customer experiences. Feel free to ask about costs before any work begins. Call (309) 808-7181 to arrange a spring inspection.
